With wheels on the bottom, roll-around planter carts make it easy to move heavy pots and plants around. Commercial carts only arrive in a few standard sizes, however you are able to customize a DIY version to match your existing planters or dimension it expressly to fit the space you have. Making your own version just requires basic construction abilities, whether you need a very simple cart for one Lawn Care service Bakersfield, or even a custom design for a transferring container Shrub Removal near house Phoenix, AZ.
Material Selection
A roll-around cart depends on the right wheels, or casters, to transfer readily. Most casters arrive rated for the weight they will carry. To ensure the smoothest rolling capability, select casters having an ability twice that of the anticipated weight of the filled cart. Swivel casters work best for planter carts because they allow you to transfer the cart in tight spaces. Another planter materials depend on which sort of cart you’re constructing. Vinyl or wood planters work best for altered roll-around carts. If you build your own platform or cart from scratch, then choose a sturdy, rot-resistant wood, such as cedar or redwood. Use galvanized screws and nails because they stand up to the constant moisture.
Modified Planters
The simplest roll-around planter begins with an existing wood or plastic planter. Select planters with hardy seams. A modified planter does not need a drip tray, which makes it best suited for outdoor usage where draining water isn’t a problem. Drill holes to your caster wheels through the bottom four corners of this planter. Insert the wheel’s bolt through the hole and screw it in the caster, securing it in place. Placing a metal or rubber washer between the mind of this bolt and the planter bottom helps prevent the bolt from working loose or pulling through the planter bottom.
Platform Carts
Rolling carts work for most kinds of vandalism. You can use the planter with or with the drip tray, and it’s possible to switch out the planters on the cart when you will need to. Make the cart in a size slightly larger than the planter base so that the planter does not tip over once it’s put upon the cart. Screw together four two-by-two planks to create a very simple frame the desired size of this roll-around cart. Cut a 1/2-inch-thick sheet of plywood to exactly the same size as your framework and screw it on top of the frame. Casters with the appropriate ability are attached to each corner of the frame. You may apply paint, stain or even a water-sealing product to the wood for both cosmetic purposes and to allow it to withstand the elements.
All-In-One Carts
An all-in-one cart allows you to customize the cart and planter size to your requirements. Begin with a very simple platform cart, but attach upright supports to each corner. If your cart is more than 3 feet, you may need to add additional uprights involving the corner supports. Nail or screw one-by-six planks to the sides between the supports to form the planter. You must drill 1/2-inch holes in the bottom platform to provide drainage for the dirt and plants. You can further personalize the cart by adding a built-in trellis or service system for tall or climbing plants.