Home

The best way to Patch a Stone Wall

When people first began constructing permanent buildings, stone was usually employed by them when creating the partitions. Stone is a very tough building materials, and many areas of the globe have a supply. Then people began implementing mortar between the stones, although the stone walls were constructed by stacking stones along with every other, shaping them with resources as required. As time passes, the mortar chip and can crack. Patching the mortar aids to preserve the integrity of the wall.

Scrape a way chipped and free mortar using a wire brush in the wall.

Cracks in the mortar. Using a hammer and chisel, chip away in the mortar in the region across the cracks. Dig to the mortar till it is in regards to a half-inch below the the top of crack.

Sweep free chunks of mortar and all the dirt from the region you chiseled. Removing the particles that is loose lets you apply the patch right to the the top of mortar, which guarantees a better grip for the patch.

Mix a batch after the directions on the packaging. If it is placed on the wall the mortar should be about as thick as peanutbutter.

Fill the cracks. Use the mortar using a trowel, and pack it tightly to the cracks. Use the side edges of the trowel to press the mortar most of the solution to the rear of the cracks. Allow the mortar to set long enough that it starts to solidify, but is malleable.

Press the mortar in to the cracks using the trowel. Filling the patch entirely makes the wall as well as the patch stronger.

Smooth the the top of patch using tongue depressor or a joint instrument. Any excess mortar from the stones using the trowel before it solidifies.

See related